Udemy - 3D printer programming using G-Code
Torrent Info
| Category | Other |
| Added | Thursday 1st June 2023 11:01:28 PM (3 years ago) |
| Size | 321.8 MB |
| Peers | 7 Peers (5 Seeders and 2 leechers) update |
| Downloaded | 224 times |
| Uploader | tutsnode Thank You (0) Report Torrent 00/0 |
| Comments | None |
| Uploader Comments | None |
| Tags | English |
| Seeders | 5 |
| Leechers | 2 |
Torrent Screenshots
NFO
No NFO was added for this torrent.
| Filename | Size |
|---|---|
| [TutsNode.com] - 3D printer programming using G-Code/2. Overview/1. General overview of the G Code language.mp4 | 75.0 MB |
| TutsNode.com.txt | 63 bytes |
| [TutsNode.com] - 3D printer programming using G-Code/3. G-Codes/1.1 3d printer Gcode and MCode commands - GCodeTutor.pdf | 84.1 KB |
| [TGx]Downloaded from torrentgalaxy.to .txt | 585 bytes |
| [TutsNode.com] - 3D printer programming using G-Code/4. M-Codes/1.1 3d printer Gcode and MCode commands - GCodeTutor.pdf | 84.1 KB |
| [TutsNode.com] - 3D printer programming using G-Code/6. Test/1. Final Assessment.html | 146 bytes |
| .pad/0 | 48.2 KB |
| [TutsNode.com] - 3D printer programming using G-Code/2. Overview/3. Coordinate System.mp4 | 59.0 MB |
| .pad/1 | 244.8 KB |
| [TutsNode.com] - 3D printer programming using G-Code/5. Program editing/2. Editing a program part 2.mp4 | 29.1 MB |
| .pad/2 | 182.2 KB |
| [TutsNode.com] - 3D printer programming using G-Code/5. Program editing/1. Editing a program part 1.mp4 | 25.3 MB |
| .pad/3 | 235.7 KB |
| [TutsNode.com] - 3D printer programming using G-Code/3. G-Codes/2. Absolute v Incremental G90 and G91.mp4 | 22.7 MB |
| .pad/4 | 16.8 KB |
| [TutsNode.com] - 3D printer programming using G-Code/3. G-Codes/4. G2 and G3 arcs.mp4 | 19.7 MB |
| .pad/5 | 30.0 KB |
| [TutsNode.com] - 3D printer programming using G-Code/4. M-Codes/1. M-Codes that 3D printers use.mp4 | 16.3 MB |
| .pad/6 | 164.8 KB |
| [TutsNode.com] - 3D printer programming using G-Code/3. G-Codes/1. G0 and G1.mp4 | 15.0 MB |
| .pad/7 | 218.7 KB |
| [TutsNode.com] - 3D printer programming using G-Code/3. G-Codes/5. G28 - Printer Home Position.mp4 | 13.5 MB |
| .pad/8 | 237.5 KB |
| [TutsNode.com] - 3D printer programming using G-Code/2. Overview/2. G-Codes and M-Codes.mp4 | 12.1 MB |
| .pad/9 | 144.2 KB |
| [TutsNode.com] - 3D printer programming using G-Code/3. G-Codes/3. Metric and Imperial G20 and G21.mp4 | 10.1 MB |
| .pad/10 | 137.1 KB |
| [TutsNode.com] - 3D printer programming using G-Code/1. Introduction/1. Introduction.mp4 | 7.7 MB |
| .pad/11 | 56.1 KB |
| [TutsNode.com] - 3D printer programming using G-Code/4. M-Codes/2. Other codes.mp4 | 6.3 MB |
| .pad/12 | 167.2 KB |
| [TutsNode.com] - 3D printer programming using G-Code/3. G-Codes/7. Plane Selection.mp4 | 4.8 MB |
| .pad/13 | 179.7 KB |
| [TutsNode.com] - 3D printer programming using G-Code/3. G-Codes/6. G4 - Dwell.mp4 | 2.8 MB |
Comments
Similar torrents
| Torrent name | ||||||||
|---|---|---|---|---|---|---|---|---|
 |
2024-08-13 17:36:55 |
0 |
7.4 GB |
0 |
154 |
23 |
||
|
SunRiseZone in
Other
::
Other
|
|
2024-12-01 14:30:28 |
0 |
5.3 GB |
0 |
93 |
10 |
|
|
freecoursewb in
Other
::
Other
|
|
2025-10-24 05:41:24 |
0 |
1.0 GB |
0 |
87 |
0 |
|
|
2025-04-01 08:00:12 |
0 |
507.0 MB |
0 |
84 |
4 |
||
|
tutsgalaxy in
Other
::
Other
|
|
2023-06-02 17:28:36 |
0 |
1.7 GB |
0 |
83 |
7 |
|
|
2026-10-24 18:52:31 |
0 |
3.5 GB |
0 |
82 |
15 |
||
|
2026-03-11 22:20:57 |
0 |
3.0 GB |
0 |
78 |
3 |
||
|
2024-11-06 17:12:46 |
0 |
3.3 GB |
0 |
77 |
5 |
||
|
2024-09-02 15:52:38 |
0 |
3.1 GB |
0 |
73 |
5 |
||
|
freecoursewb in
Other
::
Other
|
|
2026-06-03 13:57:39 |
0 |
1.5 GB |
0 |
66 |
3 |
|