Udemy CNC Milling machine programming using G Code
Torrent Info
| Category | Other |
| Added | Saturday 1st July 2023 03:55:28 PM (3 years ago) |
| Size | 269.2 MB |
| Peers | 14 Peers (13 Seeders and 1 leechers) update |
| Downloaded | 994 times |
| Uploader | tutsnode Thank You (0) Report Torrent 00/0 |
| Comments | None |
| Uploader Comments | None |
| Tags | English |
| Seeders | 13 |
| Leechers | 1 |
Torrent Screenshots
There are no images posted for this torrent.
NFO
No NFO was added for this torrent.
| Filename | Size |
|---|---|
| 1. Bonus Information.mp4 | 34.1 MB |
| TutsNode.com.txt | 63 bytes |
| 1.2 Helical-milling-21.png | 89.2 KB |
| 1. Introduction.srt | 1.0 KB |
| 1.3 G81-Drilling-Cycle-35.png | 61.2 KB |
| 2. G82 Counter bore cycle.srt | 3.3 KB |
| 1.3 GCodeTutor website.html | 82 bytes |
| 0 | 21 bytes |
| 2. Roughing out the bore using helical spiral milling.mp4 | 33.0 MB |
| 2.1 The-Doobry-prog-13.png | 81.7 KB |
| 3.3 planes-29.png | 79.6 KB |
| 2.3 MCODES-1.png | 46.2 KB |
| 1 | 5 bytes |
| 1. Helical Milling.mp4 | 24.0 MB |
| 3.1 The-Doobry-prog-2-9.png | 69.8 KB |
| 3.1 G83-peck-Drilling-Cycle-handout.png | 59.4 KB |
| 4.3 G84-Tapping-Cycle-1.png | 59.1 KB |
| 2. Roughing out the bore using helical spiral milling.srt | 10.9 KB |
| 1. Programming example part.srt | 10.9 KB |
| 1. Bonus Information.srt | 3.5 KB |
| 1. Mid Course Quiz.html | 155 bytes |
| 1. Final Quiz.html | 155 bytes |
| 2 | 53 bytes |
| 1. Introduction.mp4 | 22.7 MB |
| 1.1 The-Doobry-large-drawing-1.png | 58.9 KB |
| 1. Helical Milling.srt | 10.4 KB |
| 1. G81 Drilling cycle.srt | 10.2 KB |
| 3. Defining the working plane using G17, G18 and G19.srt | 7.2 KB |
| 1.2 Discount coupon for my course 'CNC lathe programming using G-Code'.html | 137 bytes |
| 3 | 61 bytes |
| 1. G81 Drilling cycle.mp4 | 22.2 MB |
| 1.1 trig-handout.png | 38.9 KB |
| [TGx]Downloaded from torrentgalaxy.to .txt | 585 bytes |
| 1.5 Coupon link for the course 'Foundation to CNC programming using G-Code '.html | 134 bytes |
| 1.1 The complete Doobry program - FREE!.html | 117 bytes |
| 1.4 Machinists Handbook - Free EBook.html | 107 bytes |
| 4 | 869 bytes |
| 1. Programming example part.mp4 | 17.9 MB |
| 1.2 part-1-21.png | 58.9 KB |
| 4. G84 Tapping cycle.srt | 7.0 KB |
| 2. Covering the basics.srt | 6.8 KB |
| 3. Finishing the bore using the G86 boring cycle.srt | 3.2 KB |
| 5 | 665 bytes |
| 4. G84 Tapping cycle.mp4 | 17.7 MB |
| 2.3 G82-counter-bore-cycle-1.png | 58.6 KB |
| 6 | 1.4 KB |
| 3. Defining the working plane using G17, G18 and G19.mp4 | 16.5 MB |
| 1.3 part-1-angle-9.png | 47.9 KB |
| 7 | 2.1 KB |
| 3. G83 Peck drilling cycle.mp4 | 15.3 MB |
| 2.1 Cutter-compensation-1.png | 58.0 KB |
| 4.1 G84-Tapping-Cycle-handout.png | 57.8 KB |
| 1.2 G81-Drilling-Cycle-122.png | 57.3 KB |
| 4.2 metric-coarse-tap-drill-chart.png | 32.6 KB |
| 8 | 2.2 KB |
| 2. Covering the basics.mp4 | 13.0 MB |
| 5.1 G86-bore-cycle-G98-2.png | 35.1 KB |
| 9 | 150 bytes |
| 1. Studying the engineering drawing.mp4 | 10.4 MB |
| 5.3 G85-bore-cycle-1.png | 56.9 KB |
| 3.2 planes-4.png | 56.7 KB |
| 1. Program header.srt | 5.6 KB |
| 10 | 167 bytes |
| 5. G85 and G86 Boring cycles.mp4 | 9.6 MB |
| 1.1 G81-Drilling-Cycle-12.png | 56.6 KB |
| 3.3 G83-peck-Drilling-Cycle-2.png | 56.4 KB |
| 2.1 G82-counter-bore-cycle-G98-G99-1.png | 55.7 KB |
| 2.2 Units-1.png | 32.1 KB |
| 11 | 2.6 KB |
| 1. Program header.mp4 | 8.2 MB |
| 2.2 G82-counter-bore-cycle-handout-1.png | 53.1 KB |
| 12 | 524 bytes |
| 3. Finishing the bore using the G86 boring cycle.mp4 | 8.1 MB |
| 3.2 G83-peck-Drilling-Cycle-9.png | 55.3 KB |
| 1.1 header-16.png | 54.4 KB |
| 3. G83 Peck drilling cycle.srt | 6.0 KB |
| 2. Setting the datums.srt | 4.4 KB |
| 5. G85 and G86 Boring cycles.srt | 4.2 KB |
| 1. Studying the engineering drawing.srt | 4.1 KB |
| 13 | 5.2 KB |
| 2. G82 Counter bore cycle.mp4 | 8.1 MB |
| 3.4 planes-1.png | 54.4 KB |
| 3.5 planes-2.png | 45.6 KB |
| 3.1 planes-3.png | 43.8 KB |
| 1.1 Helical-milling-handout-9.png | 41.7 KB |
| 14 | 13.3 KB |
| 2. Setting the datums.mp4 | 6.6 MB |
| 2.2 Setting-the-datum-5.png | 35.5 KB |
| 5.2 G85-bore-cycle-handout-1.png | 41.4 KB |
| 15 | 72.3 KB |
| 2.1 Setting-the-datum-3.png | 28.2 KB |
Comments
Similar torrents
| Torrent name | ||||||||
|---|---|---|---|---|---|---|---|---|
 |
2023-07-01 15:55:28 |
0 |
269.2 MB |
0 |
13 |
1 |
||
|
freecoursewb in
Other
::
Other
|
|
2023-06-01 19:32:05 |
0 |
893.9 MB |
0 |
7 |
0 |
|
|
2023-06-01 22:59:09 |
0 |
658.5 MB |
0 |
2 |
0 |
||
|
FreeCourseWeb in
Other
::
Other
|
|
2023-10-30 22:30:27 |
0 |
3.0 GB |
0 |
0 |
1 |
|
|
freecoursewb in
Other
::
Other
|
|
2023-10-23 22:59:37 |
0 |
900.2 MB |
0 |
0 |
2 |
|
|
2023-06-01 19:04:56 |
0 |
2.9 GB |
0 |
1 |
0 |
||
|
2023-10-23 21:44:42 |
0 |
1.8 GB |
0 |
0 |
4 |
||
|
freecoursewb in
Other
::
Other
|
|
2023-10-23 16:30:51 |
0 |
1.2 GB |
0 |
0 |
5 |
|
|
freecoursewb in
Other
::
Other
|
|
2023-10-23 15:01:31 |
0 |
1.3 GB |
0 |
0 |
0 |
|
|
2023-10-23 21:45:29 |
0 |
1.8 GB |
0 |
6 |
0 |
||